A Day, A Week, Hemant, A Year

After seeing our kitchen in a near finished state, Michelle and I decided that we would prefer to buy new appliances sooner, rather than later. We were planning on holding off buying a new refrigerator for at least a year, but once we saw how ours looked in the new kitchen, that plan went out the window. We had the fridge area built with a counter-depth fridge in mind, and we really didn’t like how far our current one stuck out past the counter. Plus we left an opening for a 36″ fridge, so our 28″ one looked a little ridiculous.

So the plan for the weekend quickly switched gears as we found ourselves running around to the many appliance stores in Saskatoon. The plan was to purchase a fridge, a dishwasher, and an over-the-range microwave. We left the stove upgrade until a future date since we want to make the switch to gas. This just didn’t seem like the time for that.

We focused our attention on the fridges, and narrowed our search down to three models. As it turned out, counter-depth fridges are a premium, and are few and far between. They are typically only made by some of the higher-end manufactures so that sucked. I still find it weird that they are more expensive than standard depth fridges even though their capacity is typically five cubic feet smaller.

I was kind of hung up on keeping the three appliances to be the same manufacturer. Michelle was not. We came down to two setups and got the salesman at Coast Wholesale Appliance to price out the two options. Our plan was to pick the cheaper of the two. As it turned out they worked out to be within $30 of each other. No help there.

We decided to leave and sleep on it. As we were leaving we remembered that Saskatoon Appliance had another location in the area so we decided to head over there. We had the saleslady their price out our two options just to see if there would be a difference. I kind of felt bad because the guy at Coast spent a lot of time with us. I figured if the quotes were only a little cheaper at Saskatoon Appliance we would still by from Coast.

Well as it turned out Saskatoon Appliance beat Coast by almost $1000 dollars on both setups. My loyalty to the Coast salesman faded pretty quickly and we ordered our appliances. We really liked a fridge from Fisher & Paykel. I also really liked one of their dishwashers. It is a two drawer system that lets you run two loads separately. Michelle wasn’t as impressed as me, but I managed to convince her. The company doesn’t make microwaves so we went with a Panasonic that seemed to match alright.

If you’re interested, you can read more about what we went with.

• Fisher & Paykel French Door Refrigerator
• Fisher & Paykel Double DishDrawer
• Panasonic Over the Range Microwave

Who would have thought that shopping for appliances could eat away an entire day. We spent nearly 10 hours flying from one end of the city to the other in search of the perfect fit for our kitchen. Now hopefully our new toys arrive soon so we can get our new kitchen completed. I’m also looking forward to the “new” beer fridge we get to put down in the basement.

There was no way I was tackling trying to install a kitchen. As comical an event it would have been, and as entertaining a blog post it would have produced, having all of the cabinets come crashing to the ground did not seem desirable. Luckily a friend of ours Wade (of J.J. and Wade fame), actually installs kitchens for a living. Hiring him seemed like a much better idea.

Wade and one of his guys showed up late Monday morning and got right to work. I filled them in on some pertinent information and then got the hell out of their way. I took off for the office and left the guys to do what they do. When I got back at around 5pm, I couldn’t believe how much they had actually accomplished. The majority of the cabinets were up and you could really start to see the kitchen taking form.

Once again I got out of their way and hung out in the home office. I peeked my head into the kitchen every once in a while between loud “construction type” sounds. The guys worked pretty late into the evening before calling it a night. Apparently everything went more-or-less smoothly throughout the day.

Since they traveled in from Regina, Wade and Tyler just stayed at our place. They were back up and working early Tuesday morning after Michelle and I left for work. When we returned at the end of the day they were just wrapping up the trim and some of the other more cosmetic stuff.

I got a kick out of some statistics they were keeping throughout the day. On the top of one of the lower cabinets they had written a tally of how many times two songs had played on one of Saskatoon’s terrible radio stations, Wired 96.3.

• Dead & Gone by T.I. - 9 times
• Low by Flow Rida featuring T-Pain - 9 times

Apparently the day didn’t go quite as “by-the-book” as the previous day as they had to make use of their ingenuity to get some stuff to work out. Everything looked pretty awesome to me so obviously they made some good decisions. They were hoping to wrap things up by around 4pm, but ended up working until after 9 before actually getting on the road back to Regina.

Michelle and I were super happy with how the kitchen looked so far. The only thing I was worried about from the design was how much floor space there was going to be with the cabinets around three walls. As it turned out I was worrying about nothing since it turned out great.

Now we just have to wait for the countertop to be installed. The guys showed up Wednesday to take measurements, but would likely not be able to install for at least a week. We were obviously hoping they would be done within a few days since not having a kitchen sink really sucks. Eating out is starting to get old.

You can check out more photos from the install on my Flickr site by following the links below.

• Thumbnails on Flickr
• Slideshow on Flickr

After we finished demoing the kitchen Friday night, we still had some time to start the electrical work. Because we were adding a whole new wall of counter and cabinets, and relocating the fridge, we needed to move some outlets along the north wall of the kitchen. I made a quick trip to Home Depot to pick up some materials, and then we were on our way.

It turned out that moving one light switch down about six inches created a 2 foot by 2 foot hole in the wall. Michelle was not very impressed, but her dad reassured her that it would make things easier. Nothing a little piece of drywall and mud wouldn’t cure.

As it turned out I didn’t drill enough holes in the basement ceiling beams, so I got to work on that. This time I used one of Dave’s drill bits and it worked about 100 times better than the one I own. I ripped through those no problem, but man did it make a mess. I also had the pleasure of watching nearly all of my ceiling tiles fall to the ground as I drilled. These things come down way easier than they go back up. Who would have thought redoing your kitchen would turn your entire house into a complete and utter disaster?

I pretty much took care of the grunt work (like drilling, cleaning, and passing tools) for the wiring since I know nothing in this area. I did however learn a lot while watching Dave. I don’t think I could do it alone, but I’m pretty sure I could with some guidance.

Dave finished up the wiring on Sunday without electrocuting himself so I would say that it was a successful operation. Michelle’s Uncle Ray also showed up briefly to take care of that 2 foot hole in the wall. Man, it sure seems like Ray loves the dry walling!

You can check out more picture of the wiring day on my Flickr site by following the links below.

• Thumbnails on Flickr
• Slideshow on Flickr

The weekend arrived and that marked the beginning of the actual work for the kitchen renovation. Michelle and I spent Friday night emptying the kitchen in preparation for the demo on Saturday. After a little deliberation we decided to dump everything into the living room We figured we could deal with losing that room for a few days. You can see the initial clutter of our kitchen below.

And after we moved everything out of there, it didn’t look too bad. Very deceiving.

The living room on the other hand was a complete disaster. I wasn’t too sure how I would be able to handle this for the next few days. However I was happy that everything was able to fit in the living room alone. I was really hoping to keep as many rooms as unaffected as possible.

Early Saturday morning the kitchen arrived. I was thinking we would be able to fit all of the boxes in the dining area, but when I saw the truck I knew that would be impossible. The only feasible place to store everything was the garage.  I was really hoping the installers wouldn’t mind hauling everything in as they needed it.

Michelle’s dad arrived not too much later and we started to rip the kitchen apart. I was rather pleased that everything came out without too much trouble. The lower cabinet turned out to be the only thing that wasn’t salvageable.

This was my first foray into demolishing a room in a house and it turned out to be not too bad. My only regret is that I didn’t get to use any dynamite, let alone a sledgehammer. Maybe next time.

With the kitchen being totally cleared out we were now able to start the electrical work. You can seem more pictures from the day on my Flickr site by following the links below.

• Thumbnails on Flickr
• Slideshow on Flickr

The one thing Michelle and I really dislike about our house is the kitchen. It’s not ugly or anything, but it just lacks counter and cupboard space. We’re limited to about 4 square feet of counter space to work with, and our cupboards hold about half of our kitchen stuff. Shortly after moving into the house a little over a year ago we decided that our first big project would be to redothe kitchen.

We checked out a few places to do a custom design and we ended up going with J&H Builders. We met with one of their designers, told them what we wanted, and after a few drafts we were happy with what she had come up with. We put down our deposit and placed the order. We were told it would be about six weeks for everything to be built.

As it turned out everything was ready in about four weeks and we hadn’t started any of the prep such as doing electrical work, or purchasing the hardware such as sink, faucet, and pulls. Plus we hadn’t arranged a date with our installer. So we found ourselves scrambling.

First step was to add some electrical outlets on one side of the kitchen. Michelle’s dad came over last Sunday and we checked out what we were working with. Nothing to complicated here, but it would require me to drill some holes in the 2×8 beams in the basement ceiling to run the wire from the breaker box across the house and up to the kitchen. Michelle’s dad told me it would be messy and tiring. I believed the messy part, but I didn’t buy that it would be tiring.

For those of you who know me, I’ve never really been exposed to this type of work before so drilling 15 or so 1″ holes through these 2×8 beams was not on my resume. So only after I started drilling my first hole did I realize how much this was going to suck. Michelle’s dad was telling no lie when he said it was going to be tiring.  I figured it would be faster for me to construct a 5 megawatt laser than to continue drilling.At first I just thought my drill or bit sucked, but then I realized it was probably my technique. After fiddling with my stance, I managed to get fairly proficient at making holes. The real difficulty was how awkward it was in many areas to work around ducts, and all sorts of other crap.

About two hours later I finally managed to get the holes drilled and Michelle and I started the cleanup stage. It felt good to get phase one completed in our journey to a new kitchen. Next phase: wiring the outlets with Michelle’s dad. I’m not tackling this one by myself. I like our house when it’s not engulfed in flames.

You can check out more photos on my Flickr site by following the links below.

• Thumbnails on Flickr
• Slideshow on Flickr

Since moving back to Saskatoon in 2005 I’ve been hosting the annual Geeks in Basements New Years Eve Extravaganza - a gathering of my closest friends to celebrate the coming of the new year. This also happened to be the first one that would take place in Michelle’s and my new house.

Since Saskatchewan was going through such a bitterly cold stretch we thought it would be a great idea to give the 2009 party a Caribbean theme. Our guests were informed to show up in their best island gear and enjoy some Jamaican style cuisine and groove to some funky reggae beats. We even announced that there would be a special prize for the most impressive getup.

Marla and Charles were the first guests to arrive and they sure did impress us with their costumes. All Marla needed was some suntan lotion and she could have jumped a plane to the West Indies.

Unfortunately as more guests arrived the quality of the costumes diminished. And when I say diminished I mean were non-existent. At least Michelle and I had enough leis for everyone to wear. Besides the “dressing up stick-in-the-muds”, the company was still top notch and everyone had a fantastic time.

As usual I laid out the “community camera” for people to fire off shots during the night.  I actually had no idea that there were so many picture taken until tonight when I pulled the photos off of the camera.

Feel free to check out some of the better shots on my Flickr site by following the links below.

• Thumbnails on Flickr
• Slideshow on Flickr

And in case you hadn’t guessed, Marla won the prize for best costume - a bottle of Malibu Rum.

I never made another post following the wedding announcement back in September so I thought I would give a quick update. Michelle and I have gotten the major things sorted out including the venue for the reception, the photographer, and the DJ. The bridal party are ready to go with Michelle having found hers and the bridesmaid dresses. As far as I know they are all fitted and ordered. I too have found what the men will be wearing, but I’m pretty sure they have not went and got fitted yet.  I may have to give them a deadline. Michelle being the crafty person she is has been spending a lot of her time creating our invitations and ’save the dates’. We are going to have a lot of people needing to travel a reasonable distance for the wedding, so we figured ’save the dates’ would be a good idea. Michelle finished those up last night and will be mailing them out in the next couple days. Only expect one of these fabulous creations in the mail if you’re a traveler.  If you live close by, consider this your official ’save the date’.

I guess the last major thing Michelle and I keep ignoring is where the actual wedding ceremony will take place. We’ve found that when you’re not getting married in a church, your options become quite limited in Saskatoon - especially when weather could become a factor at the tail end of September. If you have any suggestions, we’d love to hear from you.

Usually I am pretty expedient when it comes to processing photos after an event. I’m not sure why I have gotten lazy lately, but Sharon and Derrick’s wedding was back on October 25, 2008. This morning I woke up with a little extra energy and decided to work on my photo backlog.

Michelle was in the wedding and the bridal party got ready for the day at our place the morning of the wedding. This gave me a good opportunity to get some insider shots as the girls got prepared.

I didn’t get many other shots during the wedding or at the reception, but I was sure to catch of few of the cake and the first dance - something Sharon wanted me to do since her photographer was only available for the ceremony. I spent the remainder of the evening ‘getting jiggy with it’, and playing Bananagrams.

You can check out some more photos from the day by following the links below:

• Thumbnails on Flickr
• Slideshow on Flickr